The Housing includes a fan and heater elements for hot and cold weather. The housing heater, fan, and the camera are powered internally by 24v AC, and 12V DC, coming from a built in power transformer in the housing. Outside power to the housing is provided by 120 VAC coming from your house power.

The housing has additional heat insulation to keep heat out in the summer and maintain warmth in the winter.

Fan and heater keep the front window clear of moisture and frost.

Flip open top for camera insertion and cabling.

The housing is aluminum and the bracket is made out of steel.

Housing
Length: 17" (440mm) Width: 5.5" (139mm)
Depth: 4.7" (119mm)
Maxium Camera Size
Lenght: 7.7" (195mm)
Width: 2.75" (70mm)
Depth: 2.75" (70mm)
Weight: 4.55 lbs. (2 kg)
Finish: Light gray powder with black end caps
Heater: Turns on: 41 F (5 C +/- 2 C)
Turns off: 50 F (10 C +/- 2 C) Fan: on when power is on
Required Power: 90 - 230 VAC
Recommended Camera: VC700 Day/Night Camera for camera specification see camera.
Bracket: Heavy Duty Bracket with hollow center for cables.
Max load on bracket: 22 lbs. (10kg)
Bracket construction: steel
Fastener: 4 screws
Bracket Height: 230mm
Swivel Angle: 90 degrees
Tilt Angel: 120 degrees
Weight: 10.5 lbs. (4.7.kg)
Bracket dimensions: 2.6" x 1/2" x 19" (6.7cm x 3 cm x 48 cm)
2 year manufacturer's warranty

Although the camera is wireless, the camera and the housing requires power from your homes 120 VAC power. You want to locate the outdoor camera somewhere where you will have access to power.

The camera connects to your video software on your computer through your wireless network, if you are not in range of your wireless router, than you will have to run an ethernet cable to the camera to connect to your computer. A simple way to check this is to take your wireless laptop out to where you want to mount the housing and see if you can access the internet from there on your laptop.

This housing is for use outdoor use, and should not be used indoors.