Intelligent LCD Diagnostic Display: The innovative front panel LCD can be used to display detailed information on the status of your UPS and current power conditions. The LCD displays 11 different diagnostics: Input voltage level, Output voltage level, Automatic voltage regulator, Battery capacity, Runtime estimate, Load level, Output frequency, On battery, Overload, Fault Condition, and Silent mode.

Automatic Voltage Regulation (AVR): Incoming AC power is electronically regulated for dips and spikes. AVR takes incoming irregular AC power and converts it into a consistent Sine wave, so sensitive electronic equipment can achieve optimal performance.

EMI/RFI Protection: provides shielding against electromagnetic interference & radio frequency signals. Most commonly, this is used to prevent line noise or “humming” that occurs over telephone lines or stereo electronics.

Transformer-spaced Outlets: Widely spaced outlets allow you to conveniently add large transformer-based plugs without compromising the utility of other outlets.

USB Connectivity: A USB port enables full integration with included computer power management software and the auto shutdown features of Windows, Linux, and Mac OS X.

PowerPanel PE ™ Smart Management Software: In event of a power outage, PowerPanel PE saves your open files and will “Hibernate” your PC to increase the run-time on the UPS unit. PowerPanel is quickly and easily installed on any Windows-based PC, and is designed to utilize minimal system resources. Diagnostic screens give immediate visuals of the UPS’s status, and also include the following features: Silent operation mode to configure audible alarms, configurable system notifications, automatic self tests, adjustable high/low voltage warnings, event/data logging, and scheduled shutdowns.

Other Features:
LED Indicators: LED status lights indicate Power-On and wiring faults.

Optional Audible Alarms: Audible tones identify when the unit is running off battery power, unit overloads, and low battery.

Resettable Circuit Breaker: Convenient unit reset switch in case of an overload.

3-year Warranty - Manufacturer will replace damaged units if within 3 years of purchase date.

Windows Vista ™ Compliant: The Power Management software has been fully tested and is compliant with Windows 9x, 200x, Server, XP, and Vista.

UPS Type: Line Interactive
Input: Voltage: 88 Vac - 140 Vac
Frequency Range: 60 Hz +/- 3 Hz
Voltage Regulation:
Power Cord Length: 6 ft
Power Plug: NEMA 5-15P right angle
Output Power
VA: 1350
Watts: 810
On Battery Voltage: 120Vac +/- 5%
On Battery Frequency: 60Hz
On Battery Waveform: Simulated sine wave
Battery / Surge Protection Outlets: 4
Surge Protection Outlets: 4
Transformer Spaced Outlets: 1
Overload Protection: Internal circuitry limiting / circuit breaker
Voltage Regulation: Yes
Transfer Time: 4ms
Battery:
Runtime at Half Load (min): 9
Runtime at Full Load (min): 2
Battery Type Sealed lead acid
Battery Size 12V/8AH
User Replaceable: Yes
Typical Recharge Time: 16 Hours
Battery Quantity: 2
Surge Protection and Filtering:
Surge Suppression: 1,500 Joules
Maximum Surge Current: 36,000 Amps
Phone / Ethernet RJ11 / RJ45: 1 in, 1 out combo
Coax Protection: 1 in, 1 out
Management and Communications
USB Port: Yes
USB HID Compliant UPS: Yes
Serial Port: Yes
Management Cable: USB cable
LED Indicators: Power on, wiring fault
Audible Alarms: On battery, low battery, overload
Software: PowerPanel Personal Edition
LCD Display: Yes
Physical and Ports
Dimensions: 13 1/2" x 3 7/8" x 9 3/4"
Weight: 23 lbs.
Output Uninterrupted Power Lines: 4
Output Surge Protected only Power lines: 4
Input for computer connection: 1 USB, 1 Com
Network or Phone In/Out RJ45 Connector: 1 In / 1 Out
Coax Protection Ports for cable, etc.: 1 In /1 Out
Circuit Breaker Reset: 1
Wiring Fault Indicator: 1
Environmental
Operating Temperature: 32 °F to 104°F / 0°C to 40 °C
Operating Humidity: 0% - 95% non condensing
Certifications
Certifications: UL1778, cUL 107.1, FCC DOC Class B
Warranty:
Manufacturer: Cyberpower Systems
Maufacturer's Warranty: 3 Years Limited
Manufacturer's Connected Equipment Guarantee: Lifetime
Manufacturer's Connected Equipment Guarantee Amount: $425,000

The PW810 is included with our "Vault" and "Master" Home Automation Computers.

The PW810 Intelligent Power Conditioning and Battery BackUp is designed to deliver clean power to your computer, and have enough battery power to turn your computer off in an orderly manner in case of a power failure. Don't expect to keep on working when the power fails. Uninterrupted continuous power is attainable, hospitals have them installed, and they run off of diesel engines. This is not practical for the average home. Best to make sure you shut down in an orderly manner until power is restored, and protect yourself from power surges as the power is restored. The PW810 does this admirably, and is highly recommended.

Refined Automation Computers Approximate Runtimes for orderly shutdowns:
Grasshopper: 10 mins.
Cougar: 7 mins.
Rack'emUp:7 mins.
The Vault: 5 mins.
The Master: 2 mins.

Other Computers Approximate Runtimes for orderly Shutdown:
Entry-level PC with 19" LCD (150W) - 30 min.
Mid-range PC with 19" LCD (300W) - 14 min.
Performance PC with 19" LCD (500W) - 7 min.